Specifications
Cable Requirements:
Installations requiring from 121 ft to 1000 ft as you will need to run 24 volt through the lines and convert it at the camera end to 12 volt.
| Cable Length |
Cable Gauge |
Power Requirement |
| 0-120 feet |
18 |
12v 1 amp |
| 121-500 feet |
16
(recommended) |
24v 40va w/12v
1 amp converter |
| anything above 500ft |
not recommended |
|
| Model |
ATD-1000DN |
| Mounting Type |
Surface, In-ceiling, Wall, Pole |
| Signal Format |
PAL/NTSC |
| Image Sensor |
1/4 inch Color CCD |
| Horizontal Resolution |
480 TV Lines |
| Pan/Tilt Speed |
Pan:0.05 Degrees ~ 400 Degrees / sec;
Tilt:0.03 Degrees ~ 240 Degrees /sec |
| S/N Ratio |
Not less than 50DB |
| Illumination |
0.01 Lux |
| IR Cut Filter |
YES |
| AGC |
Auto/Manual |
| BLC |
Auto/Manual |
| Optical Zoom |
12x |
| Digital Zoom |
none |
| LENS |
F1.6-F3.8 f=4-88mm |
| Panning Range |
Pan: 0 Degrees ~ 360 Degrees continuous
Tilt:0 Degrees ~ 90 Degrees |
| Preset Position Number |
256 |
| Auto Cruise |
Auto switch from 0 to 54 preset positions sequentially |
| Pattern Scan |
P/T/Z scan from 55 to 63 preset positions automatically |
| Comm. Port |
RS485 |
| Baud Rate |
1200bps;2400bps;4800bps;9600bps;19200bps |
| Spectra Address |
0 ~ 255 |
| Power Supply |
DC12V 15W |
| Track Speed |
0 ~ 100 Degrees /sec |
Not compatible with H4120E.
